|Corrugated roller diameter
|Adopt negative pressure type design,which help medium paper to press evenly and closer to the surface of corrugating roller,and also get even gluing on the flute tip to have perfect laminating of corrugated paper.
|Quick change roller in 15mins,electric dolly load and delivery corrugate rolls unit into host machine while replacing corrugated rolls,then fixed on the basement of host machine,it achieve corrugated roller replacement quickly and easily.
|Corrugate roller,pressure roller and glue roll are adopted with high stability of the airbag control system,also with pneumatic control buffer effect.
|Adopt electric adjust glue width and amount,pasting device run independently,when the host stopped,to prevent the paste dry.
|Simple operation control system,PLC touch-screen interface, with colorful display operating status, easy to operate.
|Fitted with foggy sprayer device, to regulate temperature and moisture of core paper.
Main structure features:
1. Vacuum adsorption to guide paper with a strong high-pressure turbine . With wind control device machine suction silencer ; electrical control cabinet to focus on the same host is not less than 1.5 m from the operating side of the closed side of the hood.
2. Gimble drive,with independent driver box.Enclosed gear oil immersion lubrication, extend the life of the gear.
3.Glue roller and glue roller are designed to groups guide way slippage,debug and conveniently;
Corrugated roller unit is designed with host machine separately,easy for lift outside and change other type flute roller.
4. Cast iron base and wall structure , wallboard thickness of 240mm.
5.Corrugated adopt 48CRMO alloy roller material,quenched and tempered, hardened,polished surface,Corrugated diameterØ360m,surface hardness HRC60 degrees;
Corrugated controlled by cylinder displacement down .
6. Pressure roller diameter is Ø360m, surface grinding and chrome plating ; cylinder displacement control up and down , made Carbon steel 45 , the modulation process .
7. Preheating roller diameter is Ø400mm, surface grinding and hard chrome plating , all connected by a metal hose.
8.Corrugated roller and pressure roller with high temperature and pressure grease lubricated bearings.
9.Pneumatic control back to glue adhesive, glue roller diameter is Ø219mm, engraved with the pit -style textured back surface plated polished Chrome handle,transfer roller surface grinding and hard chrome plated .
10. Use of electric devices every pulp,coated paste run independently,when the host stopped,to prevent the paste dry.
11.Corrugated unilateral height is 0.10mm, high pressure roller unilateral is 0.075mm. Plus limit place device , compression cylinder is Ø160 mm cylinder.
12. Glue amount with electric adjustment digital glue,PLC touch screen and easy to operate.
13 In the machine,it’s fitted with foggy sprayer device for paper pre-heater.